Can the inputs of an FCPS-24F be activated by a NAC circuit that has a System Sensor MDL module on it?
Yes, but the Synch signal will not be transferred from the inputs of the FCPS-24F to the outputs so the FCPS-24F NACs will not be synchronized. Furthermore, some distortion of the audible signal may occur, particularly with a steady DC NAC signal. For full synchronization, install a slave MDL module on the outputs of the FCPS-24 and synchronize it with a master MDL module. However, do not daisy-chain the FCPS-24F outputs in this case. Note: The inputs on the FCPS-24F can be activated by 9-32 VDC filtered or unfiltered. Alternately, consider the FCPS-2404 (4 amp/1 NAC) which will transparently transfer a synchronized signal from an MDL module though to its output.
Related Questions
- My Mini-Clik is connected to a Toro GreenKeeper controllers rain sensor inputs, and the system will not come on. What is wrong?
- I have the USB2 Module (or a Digilent system board with a USB circuit) and it is not recognized in iMPACT. What is wrong?
- Can the inputs of an FCPS-24F be activated by a NAC circuit that has a System Sensor MDL module on it?