Do I need to install any software on the MobilePro system to connect to a Windows Terminal Server?
Yes. You need to install the RDP client software which can be downloaded from Microsoft. Procedure to install the RDP client on a MobilePro 880: Note: Steps 1 and 2 need to completed if you have not installed the Service Pack One for MobilePro 780 and 880. 1. Perform a “Hard” reset on the MobilePro 880. 2. Install NEC Service Pack 1: http://support.neccomp.com/kbtools/faq/m… 3. Make sure the Device Name is set to something other than “Handheld PC”. 1. Start-Setting-Control Panel-Communications 2. Change Device Name to a Unique Name that is not currently being used on your network. 4. Establish a Partnership with a Host using active sync. 5. Disconnect the MobilePro from the host. 6. Install “hpcrdp.exe” on your host. It can be down loaded from Microsoft: 1. Go to http://www.microsoft.com 2. Select “Search microsoft.com” under the Search tab. 3. Type “hpcrdp” in the search box and depress Enter. 4. Look for the search results titled “Terminal Server Download for Windows CE”. 5. Double