Does the MX-3000 work the system with the MRF-250 Base Station UNPLUGGED with all the devices set to IR line of sight operation (from the Program Menu, Step 7 RF Control)?
a. If learned codes are not working line of sight, try re-learning them (using 2 – learn ). or b. Use the pre-programmed code sets in the database (many users ignore the generic code sets, try them). Once ALL of your commands and macros work perfectly line of sight it is time to move to step 2. Don’t skip step 1. 2) Plug in the power supply to the MRF-250 base station and test the RF a. From the Program Menu, select step #7 RF Control b. Set each device to RF Only operation c. Select a specific flasher output for the most troublesome 6 devices. If you are planning to use the front blaster for some of your components, we will troubleshoot those later. Leave those devices set to all. d. Save the file and download to the MX-3000. e. Turn on all of your A/V components. f. Observe the MRF-250 base station, not the A/V components, and press a button with a command not a macro. Hold it down. The right hand status LED of the base station should stay lit while you press it. Release the button,
Related Questions
- Does the MX-3000 work the system with the MRF-250 Base Station UNPLUGGED with all the devices set to IR line of sight operation (from the Program Menu, Step 7 RF Control)?
- Does the MX-800 work the system with the MRF-200 Base Station UNPLUGGED with all the devices set to IR line of sight operation (from the Program Menu, Step 9 RF Control)?
- For the WireFree Intercom System, is there one master base station and then separate slave sub-stations?