How can I configure ZEW3000PF-01 Wireless Access Point after I install the APM utility?
1. There is a little switch in the back of the AP which has to be switched to PC. 2. Change your computers IP to a static IP of 192.168.1.2 3. Connect your computer directly to the AP. 4. Click Discovery. When it find the AP, it will show up on the screen with the IP address. (If it still does not find the AP, you need to reset the AP by pressing the reset button for about 5 sec. The AP will be reset to a default IP of 192.168.1.1) after that click Discovery again. 5. When AP shows up, high light it and click Configuration to configure the AP. Password to login: private 6. Change the APs IP address or enable the DHCP according to your network configuration. 7.
