Disable/Enable WEP Encryption procedure for 3347W Open an Internet Browser from a computer directly connected to the 3347W. In the address field type, “192.168.1.254” and hit “Enter” or the “Go” button. You will then be prompted to put in your 3347W’s User Name and Password. Your User Name will always be “admin” Your Password is the one that you used when you first set up your router to communicate with the AT&T network. The 3347W will then take you into the basic home page of the 3347W. While on the basic home page, click on the “Expert Mode” button. The 3347W will confirm that it is going into Expert Mode, verify that you want to go into Expert Mode by clicking “YES”. The 3347W is now in Expert Mode. Next, click on the “Configure” Tab to configure your wireless settings. Next, click on the “LAN” link. Next, click on the “Wireless” link as shown below. You will now be in the “Wireless Settings” as shown below. Next, click on the “Advanced” link within the “Wireless Settings” screen. T