How do I apply and maintain TeakGuard?
• Clean your teak using a good teak cleaner. • Wipe on three or more coats of TeakGuard. All kidding aside, applying TeakGuard is the easiest job you’ll find on your boat. The most effort you will spend is on cleaning the teak before you apply TeakGuard. Once the teak is clean, all you have to do is wipe on three or more coats of TeakGuard. Each coat will take about 15 minutes to dry, so you can easily treat all of your teak within an afternoon. In order to get the maximum lifetime out of your wood, we suggest that you keep applying coats until the last coat dries shiny. Because TeakGuard must penetrate to work, any shiny coats will not add to the lifetime of the product. How you apply TeakGuard is up to you. In our complete teak maintenance kit we provide you with a 2-inch wide foam brush as an applicator, but you may use just about anything. Some of our customers with teak decks will use a mop to quickly apply TeakGuard. Because TeakGuard will not stain your fiberglass or hurt your p
