How do I configure the ATA 186 to use Cisco Registration Level Security or Admission Level Security in H.323 mode?
A. To set up H.323 Cisco Registration Level Security or Admission Level Security, you need to make sure the following parameters are configured properly: • Set USELOGINID parameter to 1 (0: LOGINID0 and LOGINID1 fields are not used, 1: LOGINID0 and LOGINID1 fields are used for H.323 registration). • Set UID0 and UID1 to the correct E.164 IDs • Set LOGINID0 and LOGINID1 to the H323 Login ID’s • Set PWD0 and PWD1 to the correct passwords/pins (Passwords for Radius Server) • Set AUTMETHOD to 1 or 2 (0: no authentication, 1: Cisco Registration Level Security, 2: Cisco Admission Level Security) • Set NTPIP to the NTP server IP address (if DHCP server does not provide one).
A. You need to make sure these parameters are configured properly in order to set up H.323 Cisco Registration Level Security or Admission Level Security: • Set USELOGINID parameter to 1 (0: LOGINID0 and LOGINID1 fields are not used, 1: LOGINID0 and LOGINID1 fields are used for H.323 registration). • Set UID0 and UID1 to the correct E.164 IDs. • Set LOGINID0 and LOGINID1 to the H323 Login IDs. • Set PWD0 and PWD1 to the correct passwords/pins (Passwords for Radius Server). • Set AUTMETHOD to 1 or 2 (0: no authentication, 1: Cisco Registration Level Security, 2: Cisco Admission Level Security). • Set NTPIP to the NTP server IP address (if DHCP server does not provide one).
