How do I hang tab curtains?
Measure the WindowsMeasure the widths of the windows the tab curtains will hang on. You will want to add a few inches to the total measured width, normally between 2 and 4 inches. Measure the lengths of the windows and decide whether you will want the curtains to stop at the bottom of the sill, stop at the bottom of the window or fall all the way to the floor. Place the brackets at least 1.5 inches above the window when hanging tab curtains, so the tabs do not fall below the window. Mark lines on each side of the window with a pencil to indicate where you want to place the brackets. Use a level to ensure that the line is straight across, marking a new line, if needed.Attach the HardwareAttach the hardware that will hold the curtain rod. Decorative metal or wooden rods work well with tab top curtains. Tab top curtains have a space between each curtain, which shows off the look of the rod.Hang the CurtainsPush the curtain rod through the tabs of the curtains. Remove any decorative end th