How do I install products to the INTERNAL or SD expansion memory on a MAC?
We have discovered some issues installing PDB files greater than 2MB to the device memory. You can install your product PDBs using the steps below to the INTERNAL expansion memory or your SD card using either the Palm® File Transfer utility or Drive mode. NOTE: If you are installing a Skyscape Constellation the Constellation PRC and PDB must be installed to the device memory. (Ex: RNConstl.pdb and RNConslt.prc must be installed to device memory). MAC Installation steps to Tungsten T5 • Download the product.hqx or product.sit from http://www.skyscape.com • Save the product.hqx to your computer • Depending on how your Stuffit Expander or Equivalent tool is configured the expansion many happen automatically. If not drag and drop the product.hqx/sit onto the Stuffit Expander (or an equivalent tool) to install the product(s) to your Macintosh. If you do not have this tool, it is available for free from http://www.aladdinsys.com. • If the Stuffit Expander automatically unstuffed the product.