How do I refill my S.T. Dupont lighter with gas ?
Note: Do not do refill near a naked flame • For the 1, 2 and GATSBY lines: Drain the reservoir by pushing down the top of the valve (using a pencil). Refilling is achieved through the difference in pressure, so warm the refill in your hand but keep the lighter far away from any heat source (the temperature difference enables you to control the refilling process). Gently screw the refill in fully. The transparent part of the refill enables you to control the refilling process. • For the miniJet / MaxiJet: Keep your lighter upright, with the flame release facing down. Insert the tip of the S.T. Dupont refill into the valve, keeping it straight, and push down gently. Hold for several seconds. • For the D line: Insert the cartridge into the refill valve and push down gently. Hold for 5 seconds and then repeat the process. The refill allows your lighter to be refilled twice. • For the D- light line: To get to the refill valve, lift the back plate with your fingernail and turn it to block it