How Do You Build A Bunny Hutch?
Here is a guide on how to build a bunny hutch. For those unfamiliar with the term, it’s an outdoor cage for rabbits designed to protect them from bad weather all year. Begin by using the chop saw to cut six lengths of 2-by-four lumber four feet long and two more lengths five feet long. These will form the legs and lower supports of the hutch. Stand up two of the 2-foot lengths and the other 5-foot lengths in a square four feet long to a side. Measure and mark two feet up from the base of each leg. This is where the lower supports will go. Screw the other four lengths of 2-by-fours at the marked height using the 3-inch screws to the legs to create a standing structure four feet wide on each side, with the front legs standing four feet high and the back legs standing five feet high. Measure and cut four 6″ lengths of 2X4. Use the chop saw to cut each of the ends at a 45 degree angle. These will be the support struts. Use the three inch screws to fix them to each leg with one side flush a
