How Do You Change A Serpentine Belt On A 1997 Buick Skylark?
• Gather the tools you will need. They are listed in the “Things You’ll Need” section below. • Support the engine. Place the jack with the piece of wood on the jack, place under engine oil pan, and raise the jack until the engine is supported. • Remove the engine mount top plate by removing the three 15mm nuts. • Remove three 15mm bolts from the engine mount support bracket. Caution: the engine will fall back a little when the bolts are removed. • Remove the whole engine mount by removing two 13mm bolts from inside the passenger side wheel well. • When the engine mount is removed you will need to remove the wire in the clip at the bottom of the mount. Do this by undoing the clip by prying the clip open with a flat head screwdriver. • Remove the auxiliary bracket on side of engine. Start by removing the 1 bolt and 2 nuts. Note the bolt will not come all the way out; it will hit against the strut tower. You only need to move the bracket just enough to take out the belt. • Remove the belt
