How Do You Change In-Line Skate Wheels?
Do your skates no longer take instructions from your legs? Do they wobble and vibrate? It probably means you need to replace the wheels. A new set is easy to install and will make your skates as good as new. Remove the bolt running through the center of each old wheel. Using an adjustable wrench, grasp the nut on the end of the bolt. Turn the other end of the bolt with an Allen (hex) wrench (see A). Pull the bolt free and remove the wheel. Take care not to lose any plastic spacers that may be beside each wheel. Repeat steps 1 and 2 for the other wheels. Inspect your new wheels for wheel bearings (silver disks in the center of each wheel). If these are included, the new wheels are ready to be installed. If your new wheels do not include wheel bearings, transfer your existing wheel bearings to the new wheels. There are two bearings in each wheel, one on each side (see B). Remove the bearings by popping them free with the end of an Allen (hex) wrench. Again, take care not to lose any spac