How Do You Change The Bearings On In-Line Skates?
If your in-line wheels seize up or spin slowly and vibrate, they might need new bearings. Rust around the outside of the wheels and/or the sound of dirt grinding inside are also signs that it is time for a change. Step 1 Use an Allen wrench to remove the axle from the front wheel. Step 2 Pull out the front wheel. Step 3 Remove the old bearings from either side of the wheel. They should pop right off if you use a bolt or something similar. Step 4 Place new bearings on either side of the wheel. If necessary, use a flat surface for extra leverage. Step 5 Place the wheel in the wheel frame. Step 6 Use the Allen wrench to replace the axle. If your spacer is aluminum, tighten the axle bolts as far as they will go. If your spacer is plastic, tighten the bolts as far as they will go, then loosen them slightly. Step 7 Spin the wheel to see how easily it rolls. If it doesn’t spin freely, loosen the axle. If it wobbles, tighten the axle. Step 8 Repeat the steps for the remaining wheels.
