How Do You Install A Tomtom GPS System?
A TomTom Global Positioning System (GPS) is a car device that determines the best route from your current location to a destination that you enter. It then guides you to that destination through voice and visual instructions. Though these installation procedures can apply to all TomToms in general, they are specific to the TomTom ONE model. Choose an area by the driver’s side windshield, below your line of sight, to install the TomTom mount. Make sure your view is not blocked when the GPS is installed. Clean the area with glass cleaner and wait for it to dry completely. Remove the protective film from the mount’s suction cup. Moisten the bottom of the cup with a little water so it sticks securely to the glass. Press the suction cup against the windshield glass. If your model has an EasyPort dial, rotate it clockwise until it locks. Plug the power charging cord into your TomTom and the power outlet or cigarette lighter outlet of your car. Hold down the device switch for up to 20 seconds