How Do You Load Film In A Pentax K1000 Camera?
The Pentax K1000 single lens reflex camera was a popular camera for many amateur photographers. The Pentax K1000 is an entirely manual camera, requiring the photographer to focus and set the exposure for the picture. The shutter works on a mechanical system, and the only battery in the camera is used to power the internal light meter. The camera could be used in extremely cold conditions, as it did not need power from the battery to operate. Loading film in the camera is a fairly easy process that is always best done in low light. Hold the camera upright in your right hand. Locate the film rewind knob on the top left of the camera. Pull the knob straight up. This will release the camera back, allowing you to open the camera. Lay the camera down on a table or desk with the back open. Make sure there is a lens cap on the lens to protect it. Hold a roll of color or black and white film in your left hand. Pull gently on the film leader to extend approximately an inch of film from the canis
