How Do You Make Inside Cuts With A Sabre Saw?
A sabre saw cuts detail inside of small and large areas of wood used for decorative placement. You must drill a hole on the inside of the piece to allow the saw to begin a cut. The blade of the saw will slip into the hole and begin to cut out the design from the inside. Draw the design on the piece of wood. Be sure to include as much detail as is possible. Also, determine where the sabre saw should begin its cuts and where to stop. If the project is to require a few areas of cuts, then mark the points where the drill will make holes for the blade of the sabre saw to enter and begin making the decorative work. Drill a hole through the work piece in each of the places that have been marked in step one. Make sure that one of the edges is near the marked decorative outline. Place the blade of the sabre saw into the hole and turn the saw on. Begin to follow the lines and cut out the decorative work. Clean up the edges and smooth out the rough spots with sand paper. Compare the decorative wo