How Do You Operate A Mitre Saw?
A mitre saw is one of those tools that every homeowner should own. Their versatility is astounding. Mitre saws can be used for projects from building a deck to installing crown moulding. The saws are designed to cut multiple angles and bevels, and are available with sliding arms for extra ease and convenience. Chances are that your next household project may be easier with a mitre saw. Set up a mitre saw stand and mount the saw to the stand. Plug the mitre saw into a power supply. An extension cord may be required. Mark the material that needs to be cut and place it on the saw’s cutting table. Line the cutting mark up with the blade. Pull the saw’s power trigger and allow the blade to spin up to full speed. Press down on the saw’s handle so the blade cuts cleanly through the material. Let go of the power trigger and allow the blade to stop spinning before raising the blade up again. Repeat Steps 2 through 4 for the next cut.
curious.I would have thought that instruction in use would be compulsory before letting you loose,as it were.I can only assume you mean a hand mitre saw as opposed to powered.Anyway,wood or material to be cut must be clamped to the saw base for accuracy and safety.If the cut can be squared against the backstop,do so.If the cut to be made is compound as is crown moulding,then an appropriate jig should be made up for securing the material to in the right angle for cutting.angles for the cut should be calculated to make the join in the material in the centre of the joint.eg a picture frame is cut at the corners at an angle of 45 degrees.Crown moulding from say the top of kitchen units require a compound cut and frankly that is beyond the limited space available here.All this holds true for powered ones too,with the added bonus that they can chop your fingers off before you even feel it,as many joiners could prove.never switch on when fingers are near the blade,and never start the cut with
