How do you replace a power steering pump on a 1998 half ton 350 chevy truck?
First you must remove the upper portin of the fan shroud. Remove the belt, take a pully puller and pull the pully off the pump while it is still in place.undo the lines out of the steering sector(remember the high pressure line goes back in the hole closest to the engine block) Remove the three bolts behind the pulley, then remove the two nuts on the bracket behind the pump one is under the manifold and the other is on the bottom of the block. THen take the pump out remove lines and hardware and place on the new pump. WHen installing the new pump, put the pump back in place and the press the pully back on after you have put all the bolts back in the pump.