Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

How do you upgrade Route Switch Module (RSM) and LightStream 1010 (LS1010) module software on Cisco Catalyst 5500/5000 and 6500/6000 series switches?

April 26, 2017Cisco lightstream ls1010 module route RSM Software Switch upgrade

0

Posted

How do you upgrade Route Switch Module (RSM) and LightStream 1010 (LS1010) module software on Cisco Catalyst 5500/5000 and 6500/6000 series switches?

2 Answers

0

Posted

A. The RSM (also called the VLAN router) on a Catalyst 5500/5000 or 6500/6000 switch and the LS1010 module on a Catalyst 5500/5000 switch run Cisco IOS Software. RSMs and LS1010 modules have individual IP addresses and Simple Network Management Protocol (SNMP) agents. The RME Inventory manages these modules as separate devices. You can find the IP address of the RSM if you look at the Detailed Inventory report of the Catalyst 5500/5000 and 6500/6000 device that has the RSM on the chassis. The Module IP Address column in the Stack Modules section shows the IP addresses of all modules on the chassis. If you do not find the addition of RSM or LS1010 to Inventory, you must first add the module as a device to Inventory before you attempt Software Management functions. Software Management functions that run on Cisco IOS devices also can run on an RSM or an LS1010.

0

Posted

A. The RSM (also called the VLAN router) on a Catalyst 5500/5000 or 6500/6000 switch and the LS1010 module on a Catalyst 5500/5000 switch run Cisco IOS Software. RSMs and LS1010 modules have individual IP addresses and Simple Network Management Protocol (SNMP) agents. The RME Inventory manages these modules as separate devices. You can find the IP address of the RSM if you look at the Detailed Inventory report of the Catalyst 5500/5000 and 6500/6000 device that has the RSM on the chassis. The Module IP Address column in the Stack Modules section shows the IP addresses of all modules on the chassis. If you do not find the addition of RSM or LS1010 to Inventory, you must first add the module as a device to Inventory before you attempt SWIM functions. SWIM functions that run on Cisco IOS devices also can run on an RSM or an LS1010.