How to transfer data using RJ 45 between two computers.?
You can create a network folder. My Network Places – > Add Netowrk Place -> Follow the instructions on screen using the other computers IP address. Or you can create a Shared Folder. Dumping any files you need to be viewable on both computers. I suggest this as I see you say: “I am also do the same procedure & acquired the connection.” So I am assuming you got the first part done.
What u saw on the video is ok but need little correction. First connect two computers using a LAN cable (RJ45). When connecting two computers directly without using a switch/hub you need a crossover punch cable. (There are two types of LAN cable are available straight through and crossover). Then you need to set the IP of both computers manually. To set the IP go to Control panel > Network Connection. Right click on the network adaptor > Properties > double click on TCP/IP Set the first computer’s IP as IP address: 192.168.1.2 Subnet Mask: 255.255.255.0 Default gateway: 192.168.1.1 And click Apply/Ok on all windows On second computer just change IP address to 192.168.1.3 Then your network connection will be established. For sharing files, folders, drives, printer, internet you need to activate sharing. To share file/folder/drive right click on it and select sharing & security. A window will open, click “share this folder” check box and click OK. Then the file /folder/drive will be shar
