I set my record levels with the PSD300/PSD300P, but when I select the “Record” mode, the record levels disappear and “NO SIGNAL” flashes in the display momentarilyWhats wrong?
Check your “Input” selector above the CD Play/Record drive. The “Input” selector should be set to Analog for live recording. Use the Digital setting when connecting external digital sources to the digital input on the back panel. Back to top When I press the “REC” button on my RC300PSD remote, why wont my PSD300 go into record mode? The PSD300 will not record from stop mode via the remote. A record mode must be chosen first via the Rec Mode button on the unit. Press “Rec Mode” to access the record modes. Rotate the “Select” wheel to the desired record mode and press down to enter and accept the mode. Once the PSD300 is in “Record/Pause,” press the “REC” button to start recording. Press the Pause button to stop recording and mark a new track but remain in record mode. Press the “REC” button again to resume recording. Back to top When I engage the “Power” slide switch on top of the unit, it doesnt turn-on.
Check your “Input” selector above the CD Play/Record drive. The “Input” selector should be set to Analog for live recording. Use the Digital setting when connecting external digital sources to the digital input on the back panel. When I press the “REC” button on my RC300PSD remote, why wont my PSD300 go into record mode? The PSD300 will not record from stop mode via the remote. A record mode must be chosen first via the Rec Mode button on the unit. Press “Rec Mode” to access the record modes. Rotate the “Select” wheel to the desired record mode and press down to enter and accept the mode. Once the PSD300 is in “Record/Pause,” press the “REC” button to start recording. Press the Pause button to stop recording and mark a new track but remain in record mode. Press the “REC” button again to resume recording. When I engage the “Power” slide switch on top of the unit, it doesnt turn-on. The main “Power” switch located on the rear panel must first be depressed to the ON position. When the red
Related Questions
- I set my record levels with the PSD300/PSD300P, but when I select the "Record" mode, the record levels disappear and "NO SIGNAL" flashes in the display momentarilyWhats wrong?
- How do you access the menu to select Record Mode, VCVA, or Format on the DM-20 Digital Voice Recorder?
- When I press the REC button on my RC300PSD remote, why wont my PSD300 go into record mode?
