Im having problems to communicate with the MultiLog (from the PC), what should I do?
Delete the file DBLab.INI from the WINDOWS main directory. Connect the MultiLog to the PC serial port, using the serial cable. Open the DBLab software. The communication setup dialog box will open. If one of the port buttons is marked with a press the “Try to connect” key in the dialog box, the DBLab should return the MultiLog version and the COMM port used for communication with the MultiLog. In case there is a marked port, but the DBLab software is not able to communicate with the data logger (after pressing the “try to connect” button) call your local dealer for technical assistance. If no port is marked by , it means this happens when your computer uses serial ports for internal modem, network PC cards etc’. In this case it is recommended to call your local dealer for support. Yet before addressing the dealer please try the following: Turn off your PC. Turn it on again and enter the BIOS setup by pressing and holding the DEL key. In the BIOS setup choose “Integrated Periferals” and
