Installation with the Analog Telephone Adapter(ATA)?
Note: This configuration is for the Analog Telephone Adapter(ATA). • Disconnect the power from all devices on your network. This includes your Cable/DSL modem, router, and computers. • Disconnect any USB cables from the Cable/DSL modem if present. • Connect an Ethernet cable from the Cable/DSL modem’s Ethernet port to the WAN port on the router. • Connect an Ethernet cable from the LAN port on the router to the Ethernet port on the ATA Phone Adapter. • Connect a telephone to the PHONE 1 port of the ATA Phone Adapter using a standard phone line. • Connect the appropriate Power cable to the Cable/DSL modem. • Wait about two minutes for the Cable/DSL modem to boot up before continuing. • Connect the appropriate Power cable to the router. • Wait about two minutes for the router to boot up before continuing. • Connect the Power cable provided with the ATA Phone Adapter to the POWER port on the ATA Phone Adapter. • Wait at least five minutes for the Phone Adaptor to boot up. The ATA Phone Ad