Is Steamloc limited in capacity and pressure?
There are no limitations for ranges of pressure drops and capacities. We can always provide a suitable Steamloc for every application. Of course a positive pressure drop is required to remove condensate – for both mechanical traps and Steamloc. Using older technologies large process applications require level controllers or parallel trapping to remove the high condensate loads. With all piping/valves/inspection/ … that comes with it. Steamloc perfectly handles this with one unit in lineair piping – easily insulated for safety. When necessary, special alloy material can be used to meet conditions of extreme pressures and corresponding temperatures. In fact there are no limitations. The internal venturi construction is always calculated and mounted for your application as a one time only action. After start-up, Steamloc is ready for a life time condensate removal. Pressures to 130 bars are no problem. But more important are the applications with very tiny pressure drop. Even a pressure