Is there a way to over-ride the rain switch on the Fantastic Fan?
For those of you with new 6000rbta’s you might want to copy this down to override the rain sensor.(It will not work until reset in the pc board so be careful–you might not have a rain sensor when you want it.) Put the fan switch to 0. Dome closed. Up/down switch to down. Exhaust mode. Turn fan switch to 1 (low speed)and set thermostat to coldest(blue area). Slide the Automatic dome to manual position, open dome to desired height( at least about 2 1/2″ for low speed, higher for medium,etc.) Push slide back to auto. Fan has no rain sensor until you reset PC board by turning fan switch back to 0. In this mode you can adjust thermostat and speed and height manually at will until you turn the fan switch back to 0, which will reset the PC board and activate the rain sensor.
