is will this be ok or should i tear down the carburator right away?
Answer Hi CR, Gasoline left in the float bowl has varnished (gummed) and is obstructing fuel jets and passageways. The carburetor will need to be removed, disassembled, and thoroughly cleaned to restore proper performance. See the file below for cleaning intel. Respectfully, Mark Shively Carb Cleaning 101 By M. Shively The elements of internal combustion engines are: correct fuel/air ratio, spark at right time, adequate cylinder compression. There are many passageways and openings to check and clean. All are important in function and when obstructed or not working properly, have subtle to radical effects on engine performance. Vacuum leaks and carburetor synchronization also have effects on performance and should be inspected and adjusted following the below procedures. Carb Cleaning 101 Warning: Remove all rubber parts before you begin. These parts usually include vacuum diaphragms, needle valves, orings, hoses, and other parts. Spray cleaners will damage these parts. Do not disassemb
