My binding heels rotate too easily — they spin to different positions while Im touring and its annoying as heck. Fix?
This pesky backcountry problem is usually caused by how the lugs on your boot tread sit on the binding heel when in one of the two raised heel positions. It’s also caused by buildup of snow or ice on your boot heel or binding while you’re touring, which causes the binding to be pushed to the side. Several solutions: Use an anti-icing strategy such as silicon spray or rubbing the binding surfaces and boot heel with alpine wax before you tour. If the boot sole lugs are causing the problem, fill between the offending lugs with boot sole repair compound such as Shoe Goo, and/or bevel the edges of the lugs. Some users report that this problem is more likely if you’re using ski brakes, as the brakes exert quite a bit of upward force against the binding heel unit and may cause it to somehow rotate easier, or not return to position the way it should. Tweak for that is to remove one of the two brake retraction springs to it has less upward force when in the retracted position. Warning, removing