NOW HERE WE GET A LITTLE TRICKY – SEE THE SMALL HOOK IN PICTURE # 3 ?
THAT HOOKS INTO THE PART IN THE WIPER SWITCH AS SHOWN IN PICTURE # 4 THE JOINED PIECES CAN BE SEEN IN PICTURE # 5 WHEN YOU PULL BACK ON THE TURN SIGNAL STALK , TO GO HIGH/LOW BEAM , THE HOOK ON THE TURN SIGNAL SWITCH PULLS UP THE PART ON THE WIPER SWITCH THAT WILL ACTUALLY CHANGE IT FROM HIGH/LOW BEAM – PICTURES 5 – 6 – 7 – SO IF YOU HAVE NO HIGH / LOW BEAM YOU NEED TO CHECK TO SEE IF THE HOOK ON THE TURN SIGNAL SWITCH IS BROKEN AND IF ITS STILL GOOD THEN YOU NEED TO CHECK TO SEE IF THE HIGH/ LOW BEAM CONTACT PARTS IN THE WIPER SWICH IS BROKEN – PHEW !!
