Switching bars with a Marauder What specifics are required for the Marauder handlebar mod?
• I happen to visit this site and the MIG site(Marauder/Intruder Group www.migcruisers.com) quite often. I’ve noticed that a lot of the Magna riders like the looks of the drag bars on the Marauder(as do I). I have also noticed that many of the Marauder riders on the MIG site want bars that pull back more. I thought some of you might be able to talk a MIG member or two out of their bars. It certainly would be much more ecconomical for all involved. It is my understanding that the shaft size is the same so the Magna risers along with the bars could be traded for the Maruader bars with built in risers. Monique — wife of HOTMAG • Not a big deal from the Magna point of view. Nothing readily makes itself visible from the Marauder view point either but since I couldn’t actually swap I can not say first hand. I bought new Marauder bars. They bolt right on with no fuss. Magna riders will have to drill two 3/16 holes to locate the switch locater pins. I also found that there was excess slack in
