What happens with the hook mark during the dip process?
Our process requires parts to be racked individually and some method of holding the part is necessary. and the he small area where the hanger holds the parts will have no coating. There are over 15 million parts in service on automobiles coated with AquaArmor. These parts passed all cyclical corrosion testing even with the hook marks. • What makes MatalJacket better over powder coating or fusion bonded epoxy (FBEs). Excellent chemical deposition will eliminate creep corrosion. Under bond corrosion is typically the reason that other coatings fail and this where AquaArmor excells as a pre-treatment under powder coatings or fusion bonded epoxy. • Can AquaArmor be used to replace zinc galvanizing or mechanical galvanizing process. Yes! Corrosion protection of the AquaArmor process was over 1200 hours in ASTM B117 Salt Spray compared to Zinc Galvanizing which failed at 350 hours. Also, there are additional benefits if with parts for post painting or powder coating wheras Zinc Galvanizing ha