What is included with a Servenger Programmable Analog Module?
The Servenger PAM-5002R includes: • A fully-configured Anadigm FPAA • Power supplies (+5V and -5V plus an external AC adapter) • Connectors for all inputs and outputs (six analog inputs and three outputs) • Stereo jacks to connect to audio sources and output to speakers • A microcontroller with pre-tested firmware • Four indicator LEDs for Power, Anadigm ON, Successful and Unsuccessful configuration downloads • An on-board EEPROM and EEPROM programming capability • Switches to select between differential and single ended input signals • Selectable terminations for 50 ohm, 600 ohm and high impedance signal sources • Analog input and output buffer amplifiers for signals that are +/- around ground • Control circuitry for Analog Reset, Master Reset, Execute and Anadigm ON • RS-232 I/O with DB-9 connector • Serial cable to connect to your PC • A switch to select between RS-232 software flow control or hardware flow control (an important issue for some USB-to-Serial adapters) • Two 1×20 posi
