What is the CS1s maximum memory capacity?
• It is 256MB (two 128MB DIMMs). What kind of DIMMs should I use? • The PREMIO CS1 motherboard only accepts PC100, unbuffered, 3.3V SDRAM DIMM ONLY! • Due to the design of the Intel 810 chipset, you must use PC100 DIMM enough though the current Celeron’s FSB is 66MHz. I have a PnP soundcard and PnP modem, but I’m getting conflicts. • It’s recommended that you let the modem take COM2 (2F8h/IRQ3); see the question below. • And set the soundcard at 220h/IRQ5/DMA1, if possible. • Also, try adding the card in one at all time; put the soundcard in first, let 95 detect it, then add the modem. I have a plug and play modem, how do I setup it for COM2 in Windows 95? • Disable serial port 2 in the BIOS and remove the COM2 port, if present, in Windows 95’s Device Manager. Top of page Operating System Specific Questions I have an Unknown Device in Device Manager under Windows 9x. • You need to run the Intel 810 INF Update 590K. Do you have a troubleshooting guide for Windows 98/98SE? • Yes, we do;
