What is the recommended way to set the gain for a Model I system when using it with a T1 ToneMatch audio engine?
• Make sure the power switch on the power stand is in the Off position and the remote control is disconnected Note: The remote should be disconnected so that the ToneMatch audio engine solely controls the volume of the L1® system. • Make sure the ToneMatch audio engine power switch is in the Off position and its power supply is connected • Set the ToneMatch audio engine master volume control to 0 • Plug one end of a 1/4″ phone plug cable (not supplied) into the master output port on the ToneMatch audio engine. Plug the other end of the cable into the line-in jack of channel 3 or 4 on the L1® power stand Note: We recommend only connecting to the line inputs of channels 3 and 4 because channel 1 and 2 mic/line inputs have volume controls, equalization and presets that could affect the ToneMatch audio engine’s sound and performance. • Set the line-in level control on the power stand to approximately 2 Note: In some circumstances, it may be necessary to slightly adjust the level of this in
Related Questions
- I already own an L1® Model I (or Model II) system. Can I purchase the T1 ToneMatch audio engine separately and use it with the system?
- What is the recommended way to set the gain for a Model I system when using it with a T1 ToneMatch audio engine?
- What are the benefits of including the T1 ToneMatch audio engine with this system?