What Power Supply is used for the NEM System?
The PS-2410A, 24V DC, 1A power supply is used for NEM Systems of 20 or less stations. The PS-2420UL, 24V DC, 2A power supply is used for NEM Systems with 21 – 40 stations. Add-on selectors require their own separate power supply, following the same rules as above. Back to top MP-S System Q: Is the MP-S System compatible with the LE-series Sub Stations? A: Yes, with modification. Please refer to the Systems Modification Manual for more information. Q: Can the MP-S System be connected to a Paging System? A: YES, with the BA-1P Paging Adapter and appropriate sized amplifier. Q: Is the NE-NVP/B Vandal Resistant Door Station compatible with the MP-S System? A: NO, use the LS-NVP/B. Note that when installing this unit with the AP-M, change the switch position on each unit’s PC board. Q: Is the RY-AC External Signaling Relay compatible with the MP-S System? A: YES. Q: Is the SP-5N Ceiling Speaker compatible with the LEM System? A: NO, use the SP-20N or any standard 8ohm speaker with an NP-25V