WHAT TYPE OF PAINTS ARE USED ON AUTOMOBILES?
Japanese Varnish: In the early years, between 1900 and the 1920’s, Japanese varnishes were used. The varnish was applied by brush. Nitrocellulose Lacquer: in the 1920’s, several paint manufacturers were involved in the development of nitrocellulose lacquers. This paint had rapid drying and low viscosity properties, and was applied with air pressure through a spray gun leaving a hard dry finish in approximately one hour. When rubbed, polished, and waxed, it far surpassed in durability and appearance the qualities of the Japanese lacquers. Synthetic Enamel: In the mid 1930’s, a new and completely different type of paint was developed, the alkyd or synthetic enamels. It proved to have superior qualities in film strength, adhesion, luster, flexibility and durability over all previous paints. The resin base was developed from the reaction between phthalic anhydride and glycerin, with gums, oils and plasticizers added during the manufacturing process a drying oil such as linseed, a polyhydri