Why won’t my Supertooth 3 go into pairing mode?
Follow the instructions in the Supertooth 3 Manual. From off, press and hold the MFB until the LED starts flashing red and blue and you are prompted to select your preferred language. Once you have selected your preferred language follow the voice prompts to pair your Supertooth 3 to your phone. The Supertooth 3 sometimes requires a few seconds to establish a connection. Please be patient *while devices are searching. ^ BACK TO TOP 3. Is my Supertooth 3 Charged? When the battery is charged the LED will flash blue. When the battery is low the blue flashing LED will be replaced with a steady red LED and the Supertooth 3 will announce “Low Battery”. ^ BACK TO TOP 4. Why can’t I hear any sound from the Speaker? Check to make sure that both the Supertooth 3 and phone volume are not set too low. Alternatively, the phone’s memory may have become corrupt and can be fixed by re-booting the phone (turning the phone off and on again). If this does not resolve the issue delete the pairing informat