Will dbx provide amplifier and crossover settings for my speakers that are not part of the WIZARD tunings?
No, but we can offer some guidance on how to obtain the specs and enter this information manually. First, if some of the amps or speakers you are using can be found in the tunings list (click here to view current components in the latest version of Firmware), enter the SYSTEM SET UP WIZARD and choose these models. For the amps or speakers that are not part of the tunings list, enter CUSTOM. This will allow you to manually set the limiter for the amp or manually adjust the crossover for the speaker afterwards. The settings to enter would then need to come from the speaker manufacturer. To obtain this information, you must look at a spec sheet or look up the exact models online and find the FREQUENCY RESPONSE or RECOMMENDED CROSSOVER SETTINGS along with the FILTER TYPE/SLOPE of all speakers that will be connected to the Driverack. If you perform a Google search, in most cases you can locate a cut sheet for the speakers without contacting the manufacturer. With this information, you will
