How do I connect cable-ready VCR/device to non cable-ready television set?
• Allows viewing of any channel, full use of VCR/device remote control. • Connect one end of the jumper cable wire to the COAX connector at the wall plate and the other end to the COAX connector designated “Input” on the cable-ready VCR/device. An additional jumper cable wire is needed to connect the COAX connector designated “OUTput” on the VCR/device. The other end of this jumper cable wire gets connected to the COAX/VHF connector designated “Input” on the TV set. Some older TV’s may require a matching transformer (adapter). This will be needed to mate COAX connector to the VHF connector on the back of the set. Permanently tune the television set to 2,3, or 4 (depending on the market) and leave it set to that, in order to use the VCR/device for channel selection. On all connections you may need to screw-on connectors to secure connection.