How do I connect cable-ready VCR to cable-ready television set?
• Recording any channel while viewing any channel. • Connect one end of jumper cable wire to the COAX connector on the wall plate and the other end to the COAX connector designated “Input” on the VCR. An additional cable jumper wire must be connected onto the COAX connector designated “OUTput” on the VCR. The other end of this cable jumper wire gets connected to the COAX connector designated “Input” located on the rear of the TV. Make sure that both the TV and the VCR are set to the proper “CABLE” or “CATV” modes (according to the manufacturer’s instructions). Permanently set the TV to channel 2,3 or 4 (depending on the market) in order to use the VCR for channel selection. On all connections you may need to screw-on connector to secure connection.