How Do You Build Office Wall Units?
The design of the office is for work or study. Designing office wall units as opposed to buying them lends the personal flair of the homeowner to an office. Homeowners should pay special attention to wood choice and the proper finish in the planning stages of building an office wall unit. Units such as this house important information in the form of books as well as sentimental items such as trophies and awards. One common wood choice for office wall units is oak. Make marks at 23, 23 3/4, 46 3/4 and 47 1/2 inches on the 1-by-12-by-70 1/2-inch pieces (top and bottom shelves) Place the framing square on the marks and draw lines across the width of the lumber. These are the top and bottom shelves of the wall unit. Turn one of the pieces over. Make marks from the same end as before at 16 3/4, 17 1/2, 33 1/2, 34 1/4, 50 1/4, 51, 67 and 67 3/4 inches. Draw lines across the width of the lumber as before. This is the bottom of the bottom shelf. Apply glue on one of the long edges of four piec