How to update my TYSSO scanners decoder firmware to the most recent version?
The recent versions of TYSSO barcode decoders are upgradeable by the Win32 updating package via a piece of RS-232 cable. Please do the following in order to patch your scanner decoder to the most up-to-date version: 1. Scan the “Show Version” Label on your scanner’s programming manual and make sure the version date is on or after 08-08-2004. Please note that Firmware upgrading package will not work with any firmware version prior to the above mentioned date. 2. Change a piece of RS-232 interface cable for your scanner and connect it to any free COM port on your computer 3. Scan “Set All Default” Label 4. Enable the serial interface by scan “Enter Group”, “RS-232”, and “Exit” respectively in the Interface Selection Section of your scanner’s programming manual. 5. Scan Enter Group Label: 6. Scan “Upgrade” Label Below: 7. Scan “Exit” Label 8. Download the firmware update package here and install it. (Note: the firmware update package works under Windows 2000/XP only.) 9. Run the Update Ut
Related Questions
- I have a new strain of the WAZZU that current version of AV scanner from vendor XXX could not disinfect automatically. How can I disinfect documents?
- Should i update my Firmware to the most recent version (e.g. v3.98) - what are differences in the ECU map?
- How to update my TYSSO scanners decoder firmware to the most recent version?