What is the least expensive way to use my Axim wirelessly?
You need at least two pieces of wireless equipment to set up a network. As just described, one method is to install an AP or wireless router to an existing network and a WiFi CF card for your Axim. This would be the preferred method if you also want to add other wireless equipment to your home network – a laptop computer, for example (Figure 5). But what if you only want to use your Axim wirelessly or only have a dial-up modem for Internet access (Figure 6)? The answer to the least expensive way in this case is to buy a WiFi CF card as described above and a wireless adapter for your PC (Figure 7). If you have a desktop computer, this could be a PCI WiFi adapter that would be installed inside your computer or a USB WiFi adapter that would plug into a USB port. Alternatively, if you have a laptop PC, you can get a PC card (aka PCMCIA). All of the manufacturers mentioned previously in the FAQ have one or all of these. I have not seen enough comments about any of these adapters to be able